產品詳情
高容量、高速度的小規格尺寸,符合CFast 2.0規范,并適用于工控產業以及嵌入式應用。
CFast 3SE

產品特色
- SATA III interface
- Extremely low power consumption
- iSMART disk health monitoring
- Inbligent error recovery system
- Excellent data transfer speed
- Hardware write protect
- Enhanced power cycling management
概述:
InnoDisk CFAST 3SE以6.0 GB/s的速度運行,提供高達470MB/s的數據傳輸速率。連續寫入高達250MB/s,符合CFAST 2.0標準,采用7+17針連接器設計,與SATA兼容。由于省電閑置,降低了30%的功耗。CFAST 3SE具有體積系數小、適用于大多數工業應用的特點。
CFAST 3SE可以在惡劣環境下工作,并符合ATA協議。如果沒有其他驅動器,磁盤可以配置為引導設備或數據存儲設備。cfast 3se支持硬件寫保護,以防止修改設備上有價值的數據。此外,通過innodisk的增強電源循環技術和更多的電容器,cfast 3se可以防止突然停電造成的數據丟失。通過使用innodsik的ismart,用戶不僅可以監控SSD的運行狀態,還可以用圖形顯示磨損均衡狀態。
規格:
| Model Name | CFast 3SE |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | SLC |
| Type | Standard |
| Capacity | 1GB~64GB |
| Max. Channels | 4 |
| Sequential R/W (MB/sec, max.) | 470/250 |
| Max. Power Consumption | 1W |
| Thermal Sensor | Optional |
| H/W Write Protect | Y |
| S.M.A.R.T. | Y |
| Dimension (WxLxH/mm) | 42.8 x 36.4 x 3.6 |
| Vibration | 20G@7~2000Hz |
| Shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operation Temperature |
Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |
產品料號:
| Operation Temp. | 1GB | 2GB | 4GB | 8GB | 16GB | 32GB | 64GB |
|
Standard Grade (0°C ~ +70°C) |
DECFA-01GD07AC3SB | DECFA-02GD07AC3DB | DECFA-04GD06SCBDB | DECFA-08GD06SCBQB | DECFA-16GD06SCBQB | DECFA-32GD06SCBQB | DECFA-64GD06SCBQB |
|
Industrial Grade (-40°C~+85°C) |
DECFA-01GD07AW3SB | DECFA-02GD07AW3DB | DECFA-04GD06SWBDB | DECFA-08GD06SWBQB | DECFA-16GD06SWBQB | DECFA-32GD06SWBQB | DECFA-64GD06SWBQB |
| Operation Temp. | 1GB | 2GB | 4GB | 8GB | 16GB | 32GB | 64GB |
|
Standard Grade (0°C ~ +70°C) |
DECFA-01GD07AC3SB | DECFA-02GD07AC3DB | DECFA-04GD06SCBDB | DECFA-08GD06SCBQB | DECFA-16GD06SCBQB | DECFA-32GD06SCBQB | DECFA-64GD06SCBQB |
|
Industrial Grade (-40°C~+85°C) |
DECFA-01GD07AW3SB | DECFA-02GD07AW3DB | DECFA-04GD06SWBDB | DECFA-08GD06SWBQB | DECFA-16GD06SWBQB | DECFA-32GD06SWBQB | DECFA-64GD06SWBQB |
相關資源:







