產品詳情
本產品按GB12706《額定電壓35KV銅芯、鋁芯塑料絕緣電力電纜》標準生產,同時還可根據用戶需要按國際電工委員會推薦標準IEC、英國標準、德國標準及美國標準生產。The?product?is?manufactured?according?to?the?standard?of?GB12706、IEC.BS,DIN?and?ICEA?upon?request.
適用范圍?Applications
本產品適用于工頻額定電壓64/1KV及以下配電網或工業裝置中固定敷設之用。
The?product?is?suitable?for?use?in?power?distribution?lines?or?fixed?installations?with?rated?power-?frequency?voltage?up?to?and?including?0.6/1Kv.
使用特性?Operating?characteridtles
·工頻額定UO/U為0.6/1KV。
Rated?power?–frequency?voltage?UO/U為0.6/1KV。
電纜導體允許長期最高工作溫度為90℃。
Max.permissible?continuous?operating?temperature?of?conductor:90℃.
短路時(最長持續時間不超過5s)電纜導體的最高溫度不超過250℃。
Max.short?–circuit?temperature?of?conductor?shall?not?exceed?250℃(5s?maximum?duration?).
電纜敷設時環境溫度應不低于0℃。
The?ambient?temperature?under?installation?should?not?below?0℃.
電纜彎曲半徑:不小于電纜外徑的15倍。
The?bending?radius?should?not?less?than?15?times?of?cable?diameter.電纜的型號?Type?of?cable
| 型號?Type | 名稱?Designation | 適用范圍?Application |
| YJV | 銅芯交聯聚乙烯絕緣聚氯乙烯外護套電力電纜?Copper?conductor?,XLPE?insulated?,PVC?sheathed?power?cable | 室內、隧道、電纜溝內或直脈地下,能夠承受一定的機械外力和一定的拉力。?For?laying?indoor?,?in?tunnel,?cable?French,?well?or?direct?in?ground?,?able?to?bear?external?mechanical?forces?and?certain?pulling?force. |
| YJLV | 鋁芯交聯聚乙烯絕緣聚氯乙烯護套電力電纜?Aluminum?conductor?,XLPE?insulated?,PVC?sheathed?power?cable | |
| YJY | 銅芯交聯聚乙烯絕緣聚乙烯外護套電力電纜?Copper?conductor?,XLPE?insulated?,PE?sheathed?power?cable | |
| YJLY | 鋁芯交聯聚乙烯絕緣聚乙烯護套電力電纜?Aluminum?conductor?,XLPE?insulated?,PE?sheathed?power?cable |


