產品詳情
高低溫濕熱試驗箱又名環境試驗機，試驗各種材料耐熱、耐寒、耐干、耐濕性能。適合電子、電器、通訊、儀表、車輛、塑膠制品、金屬、食品、
化學、建材、醫療、骯天等制品檢測質量之用。
Constant temperature and humidity testing machine is also called environment testing machine, used to test various types of materials for their
tolerances of heat, cold, dry, humidity. Application: Quality inspection for all types of electronic products, electric appliance, and products from
communication, instrument, automobile, plastic, bl, food, chemical, building materials, medical and aerospace industries.
執行與滿足標準及試驗方法:
GB2423.1-2008/IEC6008-2-1-2007 低濕試驗方法
GB/T 2423.2-2008 高溫試驗方法
GJB150.3A一2009 高溫試驗方法
GJ B 150.4A一2009 低溫試驗方法
GB2423.22-2008 溫度變化速率試驗方法
GBT 2424.5-2006 溫度試驗箱性能確認
GB/T 10589-2008 低溫試驗箱技術條件
GB/T2423.3-2008(1 EC68-2-3) 恒定濕熱試驗方法
GJ B 150.9A-2009 濕熱試驗方法
G/BT 2423.4-2008/IEC6008-2-30:2005 交變濕熱方法
GB/T5170.18-2005 溫度護濕度組合回圈試驗設備檢定方法
GB/T10586-2006 濕熱試驗箱技術條件
GBT 2424.6-2006 溫度濕度試驗箱性能確認
GBT 2424.7-2006 (帶負載)溫度試驗箱的測量
技術參數
|
型號Model |
SN-C-80(A-G) |
SN-C-150(A-G) |
SN-C-255(A-G) |
SN-C-408(A-G) |
SN-C-608(A--G) |
SN-C-800(A-G) |
SN-C-1000(A-G) |
|
內部尺寸WxHxD(cm) |
40x50x40 |
50x60x50 |
50x75x60 |
60x85x80 |
80x95x80 |
100x100x80 |
100x100x100 |
|
外部尺寸WxHxD(cm) |
90x136x94 |
100x146x104 |
100x161x117 |
110x171x137 |
130x181x137 |
150x186x137 |
150x186x157 |
|
溫度范圍 Temperature Range |
-70℃一+100C(150C)(A:25"C B:OC C:-20`C D:-40'C E:-500C F:-60'C G:-70"C) |
|
濕度范圍Humidity Range |
20%-98%R.H.(10%-98%R.H/5%-98%R.H為特殊選用條件R.His a special optional condition |
|
溫濕度解析精度/均勻度 |
0.011C;0.1 %R.H./土1.0C;士3.0%R.H. |
|
溫濕度控制精度/波動度 |
±1.0C:±2.0%R.H./±0.5C;±2.0%R.H. |
|
升溫降溫時間 |
平均2-15C汾鐘(5-15/min度降溫速度的408L以上機臺方可) Approximaby 2-15C/minute(下he machine should be with the cooling rate is 515/min and capacity is above 408L) |
|
內外部材質 |
外箱為SUS304#不銹鋼表面條紋處理，內箱SUS 304#為不銹鋼 The external box is the SUS304# stainless steel surface strips，the inner box is SUS304# stainless steel. |
|
保溫材質 |
耐高溫高密度聚胺脂硬質發泡絕緣體材料 High temperature resistant high density polyurethane rigid foam insulation materials. |
|
冷卻系統 |
風、水冷式w段壓縮機 Air. Watercoolinq/double segment compressor |
|
保護裝置 |
無熔絲開關、壓縮機過載保護開關、冷媒高壓保護開關、超濕度超高溫產開關、保險絲、故障警告系統 Fuse-free switch, overload protection switch for compressor巾動and low voltage coolant protection switch, over-humidity and over-temperature, fuses, failure warning system
|
|
配件 |
記錄器(選購)、觀視窗、50mm測試孔、PL箱內燈、隔板、干濕球紗布 Recorder (optional), watching b, 50mm testing hole,PL internal bulbs,partition plate, dry and wet ball gauze
|
|
控制器 |
韓國“TEMI" South Korea "TEMI”或日本“OYO”牌Japan's "OYO" Brand任選Optional
|
|
壓縮機 |
法國“泰康”牌France's "Tecumseh" Brand
|
|
電源 |
3Φ380VAC土10% 50/60HZ |
