產品詳情
| 旋壓機(XYJ) | |||
| 產品用途 PRODUCT USE | |||
| 該設備用于將金屬管材的管口加工成各種形狀如:喇叭口、U形口等形狀;主要應用于空調、熱水器、飛機、汽車等管路的管端加工,文本參數以加工銅(鋁)管材為標準。 | |||
|
The equipment is used to process the pipe mouth of bl pipe into various shapes suci h as teumpet, U-shaped mouth, locating ring and so on. It is mainily used for pipe end processing of air-conditioner, water heater, airplane and automobile. Processing of copper(aluminum) pipe as the standard |
| 技術參數Technical beters | |||
| 加工面 | 可選配 1: 單頭 ¨ 2: 雙頭 ¨ | ||
| Working surface | 1：Single head 2Double head | ||
| 類別 | 可選配 A:三爪旋壓 ¨ B:單輪旋壓¨ C:三輪旋壓 ¨ | ||
| Categoroy | A:Three-jaw spinning B:Single-turn spinning C:Thtee-wheel spinning | ||
| 加工管徑 | 可選配 30: 30mm ¨ 50: 50mm ¨ 80: 80mm ¨ | ||
| Processing diameter | |||
| 標準型 | 可選配 A:手動上料 ¨ B-Z:其他定制型 ¨ | ||
| Standard type | A:Manual feeding B-Z;Other custom type | ||
| 加工管徑 | φ12mm-φ80mm | (MAX)夾持力 | 300kg |
| Processing diameter | Maximum clamping force | ||
| (MAX)加工壁厚 | 1.5mm | X-軸行程 | 200mm |
| Maximum processing wall thickness | X-axis travel | ||
| 加工工位 | 1 | X軸定位精度 | ±0.05 |
| Processing station | X axis bing accuracy | ||
| 加工時間 | 5-30s | X-軸速度 | 300mm/s |
| Processing time | X-axis speed | ||
| 電控方式 | CNC | Z軸行程 | 100mm |
| Electric control mode | Z-axis travel | ||
| 操作方式 | 自動/手動 | Z軸定位精度 | ±0.05 |
| Operation b | Automatic/ Manual | Z-axis bing accuracy | |
| 上料方式 | 自動/手動 | Z軸速度 | 150mm/s |
| Feeding b | Automatic/Manual | Z-axis speed | |
| 夾緊方式 | 液壓空芯回轉油缸 | 電源 | 三相380V50Hz |
| Clamping b | Hydraulic air cylinder rotary cylinder | Power supply | |
| 加工方式 | 旋轉冷軋 | 液壓電機功率 | 0.75kw |
| Processing bs | Rotating cold rolling | Hydraulic motor power | |
| 主軸電機 | 3kw | 液壓系統壓力 | 5MPa |
| Spindle motor | Hydraulic system pressure | ||
