產品詳情
SAV144-S03/A4S00 SAI533-H03/A4S00
SAV144-S53/A4S00 SAI533-H53/A4S00
SAV144-S03/PRP SAI533-H03/PRP
SAV144-S53/PRP SAI533-H53/PRP
SAV144-S03/CCC01 SAI533-H03/CCC01
SAV144-S53/CCC01 SAI533-H53/CCC01
ASI133-S00 ASI533-S00
ASI133-H00 ASI533-H00
ASI133-S00/SA3S0 ASI533-S00/SS3S0
ASI133-H00/SA3S0 ASI533-H00/SS3S0
ASI133-S00/SA3D0 ASI533-S00/SS3D0
ASI133-H00/SA3D0 ASI533-H00/SS3D0
<Toc> <
D
As a rule, the data transmitted via I/O terminals handled by the regulatory control blocks must be the engineering unit data. Each data item consists of data value and data status.作為一個準則，經過I/O端子傳輸給調整控制塊的數據必須是工程單位型的數據。每個數據項應包括數據值和數據狀態。
■ Data Value 數據值
The data value is a numeric data that is transmitted in or out of a function block. The data values handled by the blocks include process variable (PV), cascade setpoint value (CSV) and manipulated output value (MV).數據值是在一個功能塊內或外進行傳輸?shù)囊粋€(gè)數字的數據。這種被功能塊所處理的數值可以包括過程變量，串級設定值和操作輸出值。
The data values handled by the regulatory control blocks are numeric data in engineering unit. However, the data received from the b modules (excluding the b modules for temperature measurement as well as for pulse trains) and the setpoint data sent to analogue output modules are given as percentage values in the range from 0% to 100%.調整控制塊處理的數值必須是帶工程單位的數字值。數據被輸入模塊接收（溫度測量和脈沖串的輸入模塊除外），然后設定值被發送到模擬輸出模塊，形式為0％到100％的百分?jǐn)?shù)值。
The data value read into a function block via an b terminal is called “b data,” while the value written out of a function block via an output terminal is called “output data.” 經由輸入端子讀入功能塊的數據值叫做輸入數據，而由輸出端子從功能塊寫出的值叫做輸出數據。
■ Data Status 數據狀態
The data status is a piece of status inbation that indicates the value and quality of I/O data. 數據狀態是指出輸入輸出數據值和性質的一塊狀態信息。
The data status is conveyed as I/O data from one function block to another via I/O connection along with a data value.數據狀態都會伴隨一個數據值，從而作為輸入輸出數據通過I/O連接器從一個功能塊傳到另一個功能塊。
The data status is used to test the existence of exceptional events, such as process failures and computation errors occurred in the control computation processing perbed by the function blocks.數據狀態用于檢測例外事件的發生，比如功能塊執行控制計算處理中的過程故障，計算錯誤。
SEE ALSO參考
For the details of data status, see a chapter C6, “Block Mode and Status.”
關于數據狀態的詳細介紹，請見C6“Block mode and Status.”
