產品詳情
ASI133-S00/SA3S0 ASI533-S00/SS3S0
ASI133-H00/SA3S0 ASI533-H00/SS3S0
ASI133-S00/SA3D0 ASI533-S00/SS3D0
ASI133-H00/SA3D0 ASI533-H00/SS3D0
AST143-S00 ASR133-S00 ASD143-P00 ASD533-S00
AST143-S00/ST4S0 ASR133-S00/SR3S0 ASD143-P00/SB4S0 ASD533-S00/SD3S0
AST143-S00/ST4D0 ASR133-S00/SR3D0 ASD143-P00/SB4D0 ASD533-S00/SD3D0
<Toc> <
● Input Signal Values (RV1, RV2, RV3)輸入信號值
The b signal values (RV1, RV2, RV3) are b data handled by the Signal selector blocks.輸入信號值(RV1, RV2, RV3)是被信號選擇器塊用來處理的輸入數據
Use the Function Block Detail Builder to set the engineering unit and scale range of b signal values. The b signal values (RV1, RV2, RV3) are regarded as having the same engineering unit and scale range as those of the selected signal value (PV).通過功能塊的Detail Builder設置輸入信號值的工程單位和量程。這些輸入信號值(RV1, RV2, RV3)被認作和PV值具有相同的工程單位和量程ASI133-S00/SA3D0。
● Reset Limit Values (RLV1, RLV2)復位限制值
The reset limit values (RLV1, RLV2) are b data that are handled by a controller block when the reset limit function is used.
The reset limit values (RLV1, RLV2) are regarded as having the same engineering unit and scale range as those of the manipulated output value (MV). 當復位限制功能使用時，復位限制值(RLV1, RLV2)會作為一個控制塊的輸入數據被處理。這些復位限制值(RLV1, RLV2)被認作和MV具有相同的工程單位和量程ASI133-S00/SA3D0。
● Input or Output Compensated Value (VN)輸入或輸出補償值
The engineering unit and scale range are not defined for b compensated values (VN) received from the BIN terminal, as the numeric data of b compensated values (VN) taken in from outside are used directly for b or output compensation computation.從補償輸入端BIN接收的輸入補償值(VN)沒有指定工程單位和量程，因為從外部獲得的輸入補償?shù)臄?shù)值是直接用于輸入或輸出補償計算ASI133-S00/SA3D0。
● Tracking Switch (TSW)跟蹤開關
The data handled by the tracking switch (TSW) for the TSI terminal must be an integer value of “
跟蹤開關輸入端（TSI）的被跟蹤開關(TSW)處理的數據必須是0或1。1和0分別指示ON 和OFF。
