– radial at 3 000 min -1 (1,5 mm from bearing) 0,9 N
– axial at 3 000 min -1 0,1 N
– axial at standstill 20 N
22 Shaft play: 
– radial ≤ 0,02 mm
– axial ≤ 0,15 mm
23 Housing material steel, nickel plated
24 Mass 6,5 g
25 Direction of rotation clockwise, viewed from the front face
26 Speed up to n max. 16 000 min -1
27 Number of pole pairs 1
28 Magnet material NdFeB
Rated values for continuous operation
29 Rated torque M N   0,92 0,9 0,9 0,91 mNm
30 Rated current (thermal limit) I N   0,46 0,23 0,16 0,13 A
31 Rated speed n N   5 550 5 620 5 850 7 070 min -1
1016K003SR
1016K003SR (R th2 -50%)
12 000
M [mNm]
n [min -1 ]
0,2 0,6 0,8 0,4 1,2 1,0 1,4 1,6 1,8 0
Watt
3 000
0
9 000
6 000
15 000
18 000
U N
0,5 1 1,5 2
Intermittent operation
Operating point
at nominal value
Recommended operation areas (example: nominal voltage 3V)
Note:
The diagram indicates the recommended
speed in relation to the available torque
at the output shaft for a given ambient
temperature of 22°C.
The diagram shows the motor in a
compleby insulated as well as thermally
coupled condition (R th2 50% reduced).
The nominal voltage (U N ) curve shows
the operating point at nominal voltage
in the insulated and thermally coupled
condition. Any points of operation above
the curve at nominal voltage will require
a higher operating voltage. Any points
below the nominal voltage curve will
require less voltage.
Note: Rated values are calculated with nominal voltage and at a 22°C ambient temperature. The R th2 value has been reduced by 0%.
For notes on technical data and lifetime perbance
refer to “Technical Inbation”.
 
Specifications subject to change without notice.
 
Edition 2023 Feb. 17
 
1016 M ... SR 1016 E ... SR 1016 A ... SR
2
1,3
4,3
?10 ±0,03 ?6 -0,018
0
M5,5x0,5 A
?1 ?2,5