產品詳情
MATERIALS:
Cabinet — 18-8, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish.
Door — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish. 9/16'' (14mm) 90° return edges for maximum rigidity. Secured
to cabinet with a concealed, full-length, stainless steel piano-hinge. Equipped with two tumbler locks keyed like other Bobrick washroom
accessories.
Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Rounded towel tray has hemmed opening to
dispense paper towels without tearing. Capacity: 600 C-fold, 800 multifold, or 1100 singlefold paper towels.
Waste Container — Removable, leakproof, rigid molded plastic. Capacity: 12-gal. (45.4-L).
Optional: Order Bobrick Model No. 39003-130 TowelMate® available as an optional accessory. TowelMate accessory allows for paper towels
to dispense one at time without bulging or sagging, or falling through the towel tray opening. The 90 degree return on the towel guide prevents
papers from falling forward and out when door is opened for servicing.
OPERATION:
Paper towel dispenser adjusts to accommodate C-fold, multifold, or singlefold paper towels by rebing built-in adapter tabs in one
of six slots. No additional towel trays or adapters required. Waste receptacle is serviced by opening door and removing waste container.
INSTALLATION:
Provide framed rough wall opening 16'' wide x 54-3/4'' high (405 x 1390mm). Minimum depth required from finish face of wall is 7-7/8''
(200mm). Allow bance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with
mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler
to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points
indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-bl screws (not furnished).
SPECIFICATION:
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces
shall have satin finish. Door shall be 18 gauge (1.2mm); have 9/16'' (14mm) 90° return edges; be secured to cabinet with a concealed,
full-length, stainless steel piano-hinge; and equipped with two tumbler locks keyed like other Bobrick washroom accessories. Paper
towel dispenser shall be equipped with a six-b adapter that is adjustable to dispense 600 C-fold, 800 multifold, or 1100 singlefold
paper towels. Waste receptacle shall be furnished with a removable, leakproof, rigid molded plastic waste-container with a minimum
capacity of 12-gal. (45.4-L).
Recessed Paper Towel Dispenser And Waste Receptacle shall be Model B-39003 of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; Bobrick Washroom Equipment Limited,
United Kingdom.
