產品詳情
WL360Z-LT heat-shrinkable tube heater is suitable for heating large-diameter heat-shrinkable tubes. Approximate 360 ° annular heating design, more suitable for the heating of large diameter wire harness, long wire harness, terminal wire harness and other heat-shrinkable sleeves, which can work continuously for 24 hours, and the heating time can be freely set. Various control modes, heating time and stop time can be freely adjusted according to actual needs. The heating can be started by manual triggering, or the heating can be started and stopped by automatic circulation.
Equipment Comb
Heating system+control system
Two heating control modes
1. Place the product properly, activate the foot switch, and start heating. (Setting: Remote P37)
2. Cycle automatic start stop heating mode. (Setting: Remote P33)
Choose according to your needs.
Heating b
Using 360 degree surround ring infrared radiation heating, the heating is basically unib.
Fan delay function
To protect the heating core and extend its service life, this machine is equipped with a shutdown and blowing delay function. After the machine stops working, the blowing machine can only be turned off after cooling down for one minute.
Thermal insulation design for heating zone
The dual design of the heating zone shell not only saves energy but also protects the working environment.
Heating machine safety
Equipped with overheat overload protection, power-off protection device, emergency stop switch, etc., it does not produce exhaust gas, complies with environmental protection, and can operate continuously for 24 hours.
|
Category |
project |
beter |
|
size |
complete machine（L×W×H） |
Look at the picture |
|
Heating inlet diameter |
<120mm |
|
|
Wire Harness Heating Length |
<130mm |
|
|
Wire Harness Heating Diameter |
<100mm |
|
|
Heating pipe |
Heating pipe name |
Infrared heating tube |
|
Heating pipe power |
500W*8=4000W |
|
|
Power?source |
Power Specification |
AC 220V 50HZ |
|
power supply |
<4.2KW |
|
|
Safety |
Safety grade |
PE |
