Trigger and Integration Time Controlled by One bbbbb The integration period starts immediabbby after the falling edge of TRIG1 bbbbb signal, stops immediabbby after the rising edge of TRIG1 bbbbb signal, and is immediabbby followed by a readout period. The readout time depends on pixel number and pixel rate. Figure 8-3. Timing Diagram 8.1.4 Trigger and Integration Time Controlled by Two bbbbbs TRIG2 rising edge start the integration period. TRIG1 rising edge stop the integration period. This period is immediabbby followed by a readout period. tt Integration period stop to read-out start delay – 1 μs – ts Integration period stop to TRIG1 rising set-up time 4 μs – – th TRIG1 hold time (pulse high duration) 1 μs – – T
Table 8-3. Trigger and Integration Time Controlled by One bbbbb Label Debbbbbbion Min Typ Max ti Integration time duration 5 μs – – td1 TRIG1 falling to integration period start delay – 100 ns – td2 TRIG1 rising to integration period stop delay – 1.3 μs – tt Integration period stop to read-out start delay – 1 μs – th TRIG1 hold time (pulse high duration) 1 μs – – Integration N Readout N-1 Readout N Integration N+1
Table 8-4. Trigger and Integration Time Controlled by Two bbbbbs Label Debbbbbbion Min Typ Max ti Integration time duration 5 μs – – td1 TRIG2 rising to integration period start delay – 100 ns – td2 TRIG1 rising to integration period stop delay – 1.3 μs – tt Integration period stop to read-out start delay – 1 μs – th TRIG1 and TRG2 hold time (pulse high duration) 1 μs – – td1 td2 ti tt Integration N Integration N+1 Readout N-1 Readout N
Output Data Timing This timing corresponds to the bbbbb data of the Camera bbbb interface. The camera output data are not detailed here because fully compliant with the Camera bbbb standard (serial high-speed interface). Table 8-4. Trigger
and Integration Time Controlled by Two bbbbbs Label Debbbbbbion Min Typ Max ti Integration time duration 5 μs – – td1 TRIG2 rising to integration period start delay – 100 ns – td2 TRIG1 rising to integration period stop delay – 1.3 μs – tt Integration period stop to read-out start delay – 1 μs – th TRIG1 and TRG2 hold time (pulse high duration) 1 μs – – td1 td2 ti tt Integration N Integration N+1 Readout N-1 Readout N TRIG1 TRIG2 Table 8-5. Output Data Timing Label Debbbbbbion Min Typ Max tp bbbbb falling edge to output clock propagation delay – 7 ns – td STROBE to synchronized signals delay -5 ns – +5 ns
特別聲明：以上內容(如有圖片或視頻亦包括在內)為自媒體平臺“機電號”用戶上傳并發布，本平臺僅提供信息存儲服務
Notice: The content above (including the pictures and videos if any) is uploaded and posted by a user of JDZJ Hao, which is a social media platform and only provides information storage services.
