產品詳情
扁銅線單繞機 flat copper single winding machine
|
型號 |
Model |
US-208F |
|
線程 |
Wire diameter |
0.3MM < T ≤ 5.0MM | 2.0MM < W ≤ 12.0MM | WT=S ≤ 30mm2 |
|
圓數 |
Turns |
N+1 |
|
軸數 |
Axis |
2 |
|
送線范圍 |
Wire feeding range |
0.1-N+1 |
|
圓數高度 |
Coil height |
≤ 60MM |
|
送線軸 |
Wire feeding axis |
0.85KW |
|
繞線軸 |
Winding axis |
0.75KW |
|
機器尺寸 |
Machine dimension (L*W*H) |
1050*680*1650 (MM3) |
|
實際尺寸 |
L*W*H |
1700*1250*2000 (mm3) |
|
機器重量 |
Machine weight |
450kg |
1.機器2軸分別為送線軸、繞線軸。成型部分由手臂軸配合完成。各軸相互獨立、相互關聯。
2.機器采用獨立送線裝置,可實現單次、多次送線,任意長度送線。
3.機器采用電腦操作界面,可保存各規格產品的調機參數。
4.機器細節描述:材料自放料架始,依次經過校直機構、送線機構,
成型機構、卷曲主軸。放線架光電感應送線;校直器(單元)對
5.線材進行雙向校直;送線采用氣缸夾持、伺服模組送料,卷曲繞
線成型。
1. The two axes of the machine are the wire feeding axis and the winding axis. The bing part is completed by the cooperation of the winding axis. The axes are independent and interrelated.
2. The machine adopts an independent wire feeding device, which can realize single, multiple wire feeding, and wire feeding of any length.
3. The machine adopts a computer operation interface, which can save the adjustment beters of products of various specifications.
4. Detailed debion of the machine: The material starts from the wire decolier, and then passes through the straightening mechanism, the wire feeding mechanism, the bing mechanism, and the cbing spindle. Wire feeding by photoelectric sensor on pay-off stand; straightener (unit) straightens the wire in two directions; wire feeding adopts cylinder clamping, servo module feeding, spinner and winding bing.


