產品詳情
Standard with one air outlet, optional size, customizable!
Free 3D drawings provided! The equipment is suitable for installation on assembly lines!
Standard with one air outlet, optional size, customizable!
Free 3D drawings provided! The equipment is suitable for installation on assembly lines!
Standard with one air outlet, optional size, customizable!
Free 3D drawings provided! The equipment is suitable for installation on assembly lines!
The WLRS200B-Z heat shrink tube heating machine is suitable for shrinking products such as PE heat shrink tubes, PVC heat shrink tubes, and double wall heat shrink tubes with adhesive, and can be installed on the assembly line for use. Adjust the temperature according to the production process requirements and accuraby control the temperature. Short blow shrink time, suitable for heating any size of heat shrink tube, small size, light weight, and easy to move. High thermal efficiency, durable and durable, instant heating, and can work continuously for 24 hours without interruption.
characteristic:
Temperature regulation
The air outlet is equipped with a temperature sensor, which can adjust the temperature as needed. Temperature control accuracy ± 1 ℃; Operating temperature<395 ℃. Digital display of temperature.Adjustable air vent direction
The air outlet of this machine can blow hot air up and down, making it convenient to use.
Thermal insulation
Multi fiber insulation cotton insulation, sturdy casing, safe and reliable to use, can effectively maintain high-temperature operation.
High heat exchange efficiency
Cleverly designed wind tunnel, air evenly passes through the inside/outside of the spiral electric heating wire, with nearly 100% heat exchange, minimal wind pressure loss, and low flow rate.
|
Basic beters |
|
|
Overall dimensions （L×W×H）mm |
See figure |
|
Outer packaging size （L×W×H）mm |
600*290*380 |
|
net weight KG |
8.5 |
|
gross weight KG |
14.5 |
|
Overall power KW |
2.05 |
|
Noise decibels |
42 |
|
tuyere |
|
|
Curved circular mouth diameter 26mm |
S |
|
Lengthened curved circular mouth diameter 26mm |
O |
|
Diameter of straight round mouth 26mm |
O |
|
U-shaped air outlet |
0 |
|
Single air outlet |
S |
|
insulation design |
|
|
Multi fiber insulation cotton insulation layer |
S |
|
Heating system |
|
|
Heating b: Resistance wire heating |
S |
|
service life （<350℃) >10000h |
S |
|
Power 2KW |
S |
|
HW220V Standard temperature controller |
|
|
Digital display temperature |
S |
|
Temperature control b: solid-state relay |
S |
|
Inbligent temperature control meter |
S |
|
Temperature range |
|
|
Safe use temperature <395℃ |
S |
|
precision ±3℃ |
S |
|
Centrifugal blower |
|
|
50W Air volume：198m3/h Air volume pressure：298pa |
S |
|
secure |
|
|
security level PE |
S |
|
power supply |
|
|
power requirement 220V，50Hz |
S |
|
package |
|
|
carton |
S |
|
S=Standard configuration; O=optional; Empty=None. The above beters are for reference only and are subject to the actual factory product data of our company. |
|
