產品詳情
Main features:
主要特點
1) 管內設計了氣氛噴射器可將實驗所需氣氛直接噴射在物料處，有助于反應更充分。
Atmosphere injector design inside tube can directly inject the necessary atmosphere onto materials to help react more fully.
2) 樣品平放在內管上可以實現內管和外管同時通氣體，平放的樣品有助于薄膜生長，電極測試，溫度更均勻。
Sample put horizontally on the inner tube can let gas flow into outer/inner tube simultaneously, and horizontal sample is helpful for film growth& electrode test, with evener temperature.
3) 該設備也具有可作為氧化物晶體生長，退火等功能。
The device can also make oxide crystals grow, and anneal, etc.
Technical Parameters
技術參數
|
Power 輸入電源 |
· Power rated: 3KW · 額定功率：3KW |
|
Voltage 電壓 |
· Voltage rated: AC208-240V 50/60HZ · 額定電壓： AC208-240V 50/60HZ |
|
Working Temperature 工作溫度 |
· Max. Temperature: 1200 °C ( 1 hr) 最高溫度：1200℃ (1小時) · Continuous working temperature: ≤1100℃ 持續工作溫度：≤1100℃ · Recommended heating Rate: ≤15°C /min 推薦升溫速率：≤10℃/分 |
|
控溫方式 |
· PID automatic control and auto-tune function. 模糊PID控制和自整定調節 · 30 programmable segments for precise thermal processing. 智能化30段可編程控制 · Built-in protection for the over-heated and broken thermocouple. 超溫和斷偶報警功能 |
|
Length of heating zone 加熱區長度 |
· 440mm |
|
Length of constant zone 恒溫區長度 |
· 200mm |
|
Heating Elements 加熱元件 |
· Resistance wire, Fe-Cr-Al Alloy doped by Mo · 電阻絲（摻鉬鐵鉻鋁合金） |
|
Temperature Accuracy 控溫精度 |
+/- 1 °C |
|
Processing tube 爐管 |
· Tube size：Φ50/60/80/100*1000mm(optional） 爐管尺寸：Φ50/60/80/100*600mm（管徑可選） · Two tube blocks are included for blocking heat radiation generated from tube center, must be fully inserted into the furnace chamber before heating(quartz or ceramic optional) 兩個管堵阻擋管中心產生的熱輻射，必須在加熱前塞進爐膛的正確位置（石英和氧化鋁可選）
|
|
Dimensions 尺寸 |
· Furnace size: 590*380*500mm(L*W*H without tube & flange) 爐子尺寸： 590*380*500mm(長*寬*高 不含爐管和法蘭) |
|
Net Weight 凈重 |
60kg |
|
Shipping Weight 毛重 |
90kg |
|
真空法蘭 |
· Special designed flanges 定制法蘭
|
|
Vacuum Pressure 真空壓力 |
· 133torr can be achieved by mechanical pump 機械泵可達133torr（1pa） · 10^-6 torr can be reached by molecular pump 分子泵可達10^-6torr（10^-3pa） · Please click the picture below to order vacuum pump 點擊下列圖片訂購真空部件 |
|
Warranty 質保 |
One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年質保終身支持（消耗品如爐管，石英管堵，O型圈等不在質保范圍內） |
|
Warning 注意事項 |
· Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. · 在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。 |
|
|
